200A 35kV Large(Small) lnterface Loadbreak Elbow
Product name: 35kV/200A Large(Small) lnterface Loadbreak Elbow
1.The 35kV/200A deadbreak connectors suitable for master or branch distribution of power system of padmound transformer,ring main unit and cable branch box.
2.It can mate with 200A bushing insert and 200A jack ofT- II connector.
3.Conductor cross section is 25~ 240mm²
Executive standard
★ ANSI IEEE std386-2006 Separable insulated connector system for power distribution systems above 600V;
★Exposed semiconductor sheath of ANSI IEEE592-1990 high voltage cable joints and separable insulated connectors;
★IEC60502 rated voltage 1kV (Um=1.2kV) above to 30kV (Um=36kV) extruded insulated power cable and its accessories;
★IEC61442 rated voltage 6kV (Um=72kV) to 30kV (Um=36kV) power cable accessories test method;
★GB12706-2002 rated voltage 1kV (Um=12kV) to 35kV (Um=405kV) extruded insulated power cables and accessories;
★GB311.1-1997 Insulation coordination of high-voltage power transmission and distribution equipment;
★GB/T41.9-1999 technical conditions for high-voltage bushings;
★GB11032-2010 AC gapless metal oxide arrester;
★ DIN47636-7-1990 Power cable with protruding cone can be divided into accessories set, Um below 36kV bushing and can be divided into the connecting piece device ruler.
Electrical performance parameter table
Introduction to cable selection
Product diagram
Packing instructions
Special Note: Silicone grease and cleaning cloths may not be delivered due to customs reasons. If delivery is required, please consult customer service before placing an order.
